Tractor Wood Chipper With 210lbs. Weight Flywheel For a Self
Feeding Shredder
The Fred BX42S tractor wood chipper is a well constructed, but
powerful and robust wood chipper.
The wood chipper is delivered complete with PTO shaft. In the PTO
is on one side of a shear pin installed, which serves for safety as
a breaking point in blocking or overload. So you can easily use
larger tractors with more than 100 hp. You should have at least a
motor power of 30 hp. The PTO speed must be 540 - 1000 RPM/ min.
be.
The hopper has a top opening of 51 x 51 cm; at the bottom of the
opening has a dimension of 10.2 x 25.4 cm. , A maximum diameter of
10 cm are shredded. Softer woods can be shredded with a size of up
to 25 cm, if necessary; with such diameters are processed into
firewood in the rule and not chopped.
The processing of the BX42S is very solid; the material thickness
of the plates used in the bearing portion 10 and be 5 mm, to the
hoppers and non-structural parts of 2 mm.
For transport, the hopper can be easily folded up and secured.
The machine is well built, easy to maintain; so you can open with
the removal of just one screw the complete flywheel cover and has
access to the 4 cutting blades. These cutters have blades on both
sides, so they can be easily rotated as needed. The flywheel has a
weight of 50 kg and has put on wings, which produce the very strong
train by which ultimately the shredded is blown out through the
discharge hopper. A strong draughft prevents clogging of the
shredder.
The discharge hopper has a height of 152 cm (excl. The raising of
the lower arm) and can be rotated 360 degrees. Thus, the shredded
leaves easily fill to higher trailer or directly in big bags. The
ejection angle can also be changed. The BX-42S flings the shredded
up to 6 meters! Color Black.
The shredder is designed for the 3-point hitch and can be used from
Kat. I.
Spare parts available from us at any time, sent outwith UPS
immeditaly.
